Adding the ini File

You can add the ini file to the OVOC's Software Manager in order to perform initial configuration of device parameters which cannot be configured after defining the device in the OVOC. When loading the ini file to the device, operators can select one of the following options according to requirements:

■

Full Configuration ini file download – with validation. The device checks the validity of the ini file before the file is loaded to the device, and then the file is loaded to the device.

■

Full Configuration ini file download – without validation and apply (for software upgrade). The device does not check the validity of the ini file and the loaded file does not take effect unless the device is restarted.

■

Incremental ini file download (the previous configuration remains) Enables loading a subset of certain parameters rather than loading the device's entire configuration. Only those parameters you want to configure are loaded.

➢

To add the ini file to the OVOC:

1.

Access the relevant Global or Tenant scope (see Accessing Scopes).

2.

Open the Software Manager page (System > Configuration > File Manager > Software Manager).

Software Manager

3.

Click Add and select Add Auxiliary File from the menu drop-down.

Add Auxiliary File – ini File

4.

From the 'Tenant' drop-down, select the tenant under which the ini file will be added.

5.

From the 'File Type' drop-down, select INI (default) if it isn't selected already.

6.

Next to the 'File Name' field, click Choose File and browse to the ini file's location.

7.

Enter a description of the file in the 'File Description' pane for intuitive future file management, and then click OK; the ini file is added to the Software Manager.